Ghost Controls Gate Repair in Santa Ana, CA

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Ghost Controls Gate Repair in Santa Ana, CA | San Diego Gate Company

If your Ghost Controls opener is stalling, beeping, or reversing mid-cycle in Santa Ana, the problem is usually not the control board. We provide independent Santa Ana Gate Repair for Ghost Controls systems, and the single biggest difference here is that many of these operators are mounted on decades-old wood gates that move with the seasons. That movement is what beats up the arm, the limits, and the battery. Call (877) 517-5469 and we will figure out what actually failed, not what a parts catalog says might have failed.

Professional welder performing metal gate repair with safety equipment in Santa Ana, CA

Call (877) 517-5469

We work on Ghost Controls sales & service every week, from the tube-style single swing kits to the dual-slide systems with solar and battery backup. San Diego Gate Company is a gate-only shop. No garage doors, no fencing side hustle. Rob Vickers runs our service team, and after two-plus decades tracing operator faults across Southern California, he has learned the hard way that the control board is rarely the villain. That matters in Santa Ana, where the gate hardware and the operator have to be diagnosed together.

Why Santa Ana Residents Choose Us for Ghost Controls Service

Most gate companies offering Ghost Controls in Orange County can swap a battery. Few of them can tell you why a Ghost Controls arm is over-amping at the closed position on a Tuesday but not a Sunday. We can. We have worked on Ghost Controls solar and low-voltage swing and slide operators since the brand became a DIY favorite, and we know its battery-first architecture well enough to separate an operator fault from an installation fault.

We are an independent service provider, not authorized, sponsored, or endorsed by Ghost Controls. That independence means we diagnose what is actually wrong and we tell you straight when a repair makes sense and when it does not. You will not get pushed into a brand-new operator because we do not stock the old part. We use genuine Ghost Controls replacement boards, batteries, arms, and mounting hardware where the part is still in production, and quality aftermarket batteries and solar panels only when they meet or exceed the original spec and we can stand behind them.

Santa Ana homeowners and property managers call us because we show up knowing the difference between a Ghost Controls TDS2 and a DTP1, and because we understand what the local climate does to both. That combination is harder to find than it should be.

Explore

Styles & brands we work with

Wrought iron
Wrought iron
Wood & steel frame
Wood & steel frame
Farm & ranch
Farm & ranch
Sliding driveway gates
Sliding driveway gates
LiftMaster operators
LiftMaster operators

Common Ghost Controls Gate Repair Problems We Solve in Santa Ana

  • Battery and charging faults from dry-heat stress. Santa Ana’s inland sun is rough on the plastic housing and solar-panel wiring on Ghost Controls units. A system that works all morning can fault low-voltage mid-afternoon even with a clean panel. We test the panel output, the charge controller, and the battery under load, because one of the three is usually lying about its condition.
  • Limit and force faults from swollen wood gates. In the dry season a wood gate cracks and lightens. After the first wet week it swells and binds at the hinge. The operator reports an obstruction that is really a gate no longer swinging freely. We re-hang or trim the gate, then reset the travel and force limits so the opener stops fighting the wood.
  • Swing-arm and bracket failure from leaning posts. Santa Ana wind load and years of dry-summer movement shift gate posts slowly. The Ghost Controls arm then runs out of travel or over-amps because the geometry changed, not because the board failed. We re-plumb and brace the post, replace the bracket if it is bent, and reset the arm travel.
  • Radio, keypad, and receiver dropouts after a power event. Older open-style Ghost Controls control boxes sitting in full sun develop corroded battery terminals and flaky receiver connections. After a power blip, remotes and keypads go dead. We clean and re-seat terminals, check the antenna, and re-pair devices before anyone spends money on a new board.
  • Solar panel and battery backup issues on the ABBT and SPK add-on kits. The solar panel wiring degrades faster in Santa Ana’s heat than in coastal cities. We see cracked junction boxes and brittle wire insulation regularly. The fix is usually a re-termination and a battery capacity test, not a whole new kit.

Ghost Controls Service in Santa Ana: What Local Conditions Mean for Your Equipment

In Santa Ana’s 1920s to 1940s bungalow blocks across 92701, 92703, and 92706, driveway gates are frequently hung on original redwood or cedar posts that have been patched for decades. The Santa Ana winds and the dry-summer-to-wet-winter cycle cause those posts to swell, crack, and shift at the hinges, and the Ghost Controls arm suddenly will not complete its cycle. Homeowners call thinking the operator died. Most of the time the operator is fine and the post is the problem. On an older block in 92703, a customer needing Ghost Controls service in Tustin and nearby areas had a single-swing kit on a patched redwood driveway gate that started faulting every afternoon, and the arm was over-amping near the closed position. We found the hinge-side post had checked and leaned just enough over the dry summer to change the arm geometry. We re-plumbed and braced the post, re-hung the gate with new hinges, then reset the arm travel and load-tested the battery and solar charging before calling it done. That is the kind of repair that does not show up in a Ghost Controls troubleshooting guide, and it is exactly what Santa Ana gates need.

If it moves on a track or swings on a hinge, there is a reason it stopped, and it is usually not the one you think. Around here, it is usually the post.

Ghost Controls Models & Products We Service in Santa Ana

We cover the full Ghost Controls line that is actually installed around Santa Ana. That includes the TDS2 and TSS1 single-swing series, the DTP1 and DSP1 dual-swing and dual-slide kits, and the AXWK heavy-duty opener kits with wireless keypads and remote kits. We also service the solar panel and battery backup add-ons that keep these systems running off-grid.

For parts, we use genuine Ghost Controls boards, batteries, arms, and mounting hardware when the part is still in production. When a factory battery is discontinued or a solar panel is obsolete, we use aftermarket equivalents that meet or exceed the original spec and that we can stand behind. We stock common Ghost Controls batteries and limit components locally for fast Santa Ana turnaround, so you are not waiting a week for a part that died on a Tuesday.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Ghost Controls Service Pricing in Santa Ana

Ghost Controls repair costs in Santa Ana depend on what actually failed. A battery replacement typically runs $150 to $280 including the part and testing. A swing-arm bracket repair or replacement runs $180 to $320 depending on whether the post needs bracing. Control board replacement runs $250 to $450 installed. Full post re-plumb and gate re-hang work on older bungalow gates runs $350 to $700 when hinge and bracket work is included. Solar panel and charging system repairs run $180 to $400 depending on wiring condition.

Every quote is written and agreed before any work starts. You will not get a surprise invoice. Call (877) 517-5469 for a free estimate, and we will tell you whether the operator, the battery, or the post is really what failed.

Serving Santa Ana, CA — Our Local Coverage Area

We’re based in the Santa Ana area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.

FAQs – Ghost Controls Gate Repair in Santa Ana

Service Areas Near Santa Ana

We serve Santa Ana and the surrounding Orange County cities, including Santa Ana service area coverage across 92701, 92702, 92703, 92706, and 92707. We also run calls into Ghost Controls service in La Quinta and Ghost Controls service in Fountain Valley, plus Buena Park, Brea, and La Palma for property managers who need one gate shop across multiple sites.

Book Your Ghost Controls Service in Santa Ana Today

Call (877) 517-5469 and tell us what the gate is doing. We will ask a few questions, give you a straight read on whether the operator, the battery, or the post is at fault, and schedule service that fits your day. Same-day calls are available for Ghost Controls repair in North Tustin and Santa Ana when we have a truck in the area.

Written by Rob Vickers, Owner at San Diego Gate Company, serving Santa Ana and Orange County since day one.

Need Gate Repair help in Santa Ana? Licensed & insured · 30–60 min response · free estimates
Call (877) 517-5469
Areas We Serve

Request a Free Estimate in Santa Ana

Tell us what you need — San Diego Gate Company responds fast. No obligation.

When you send us your details, you agree to our Privacy Policy and agree to be contacted by call, text, or email concerning your request, including by the partner businesses that may perform the service.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch