Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Aliso Viejo
Electric gate repair in Aliso Viejo typically runs $185 – $420 for most operator, keypad, and sensor fixes, and we can usually have a technician at your home within 24 – 48 hours of your call. If your gate won’t open, grinds mid-swing, or has a keypad that stopped responding, that’s the work we handle every day in the 92656 and 92698 zip codes. Our Electric Gate Repair team knows the gates in Glenwood, Westpark, and the villages around Aliso Viejo Town Center because we’ve been opening them up for years. Call (877) 517-5469 and we’ll give you a straight answer and a free estimate before any work begins.
Why San Diego Gate Company Is Aliso Viejo’s Preferred Electric Gate Repair Company
We’re gate specialists, not generalists. Every technician who rolls up to an Aliso Viejo driveway knows the difference between a DoorKing swing operator and a LiftMaster slide unit, and more importantly, knows which one your home actually has. Homeowners in communities like Glenwood and Westpark call us because we diagnose the real problem, no upselling you a new system when a repair will do. HOA managers trust us because we understand architectural review requirements and don’t leave a mismatched panel or the wrong powder-coat finish on a community entry gate. From a broken hinge to a full electric gate installation, one call covers it.
We carry parts for the brands most common in this city’s 1980s and 1990s housing stock, which means we’re not waiting a week on a backordered board. And because we work Aliso Viejo regularly, our routing puts us in your neighborhood more often than a shop based further north. That translates to shorter wait times and a technician who already knows the gate style on your street.
Styles & brands we work with





Gate Access Control in Aliso Viejo
Gate Access Control in Aliso Viejo covers the electronics that decide who gets in: keypads, card readers, intercom wiring, telephone entry systems, and the control boards that tie them to the operator. In a master-planned community like this one, access control isn’t optional. If your pedestrian gate keypad is dead or your driveway gate won’t respond to the remote, you’re either locked out or leaving your home unsecured. We diagnose the real point of failure, whether that’s a worn keypad membrane, a water-damaged board, or a receiver that never got a surge protector when the home was built.
Keypad and Intercom Repairs
Most Aliso Viejo keypad failures come down to sun and moisture. UV breaks down the plastic housing on units that have faced west for 20 years, and the membrane buttons underneath stop registering. We replace the keypad with a unit that matches your existing wiring, then we seal the housing properly so the next decade doesn’t repeat the same failure. Typical cost for keypad repair or replacement in Aliso Viejo runs $145 – $285.
Control Board Diagnostics and Replacement
The control board is the brain of your gate system, and in this city’s older housing stock we see boards that were installed without surge protection. A single voltage spike from a summer thunderstorm or a Santa Ana wind event taking down a nearby transformer can cook a board. We test the board, verify whether the operator is still good, and replace only what’s actually failed, typically $260 – $520 for the board and labor.
Commercial Gate Operator in Aliso Viejo
Commercial Gate Operator in Aliso Viejo means the heavy-duty slide or swing operators on apartment complex entries, HOA community gates, and business parking access points. These units cycle dozens or hundreds of times per day, and when one fails, it’s not an inconvenience, it’s residents calling the HOA and visitors stacking up at the entry. We service operators from LiftMaster, DoorKing, Elite, and the other major brands a commercial property is likely to run, and we can usually have the gate moving again the same day we diagnose it.
Slide Gate Operator Service
Commercial slide gates in Aliso Viejo apartment and HOA communities take a beating, chain-driven units especially. We check the chain tension, inspect the guide rollers and the track, and verify that the operator’s torque limits are set correctly. A typical commercial slide operator repair in Aliso Viejo runs $420 – $950 depending on whether we’re replacing a limit switch or the entire motor and gearbox assembly.
Swing Gate Operator and Hinge Replacement
For commercial swing gates, hinge failure is the quiet killer. A property manager notices the gate is slower, then the operator starts straining, then the motor burns out. We replace commercial-grade hinges before they destroy the operator, and if the operator is already gone, we install a new one sized correctly for the gate’s actual weight, not the optimistic spec from the original build.
Trusted Brands We Service in Aliso Viejo
We work on virtually every major gate brand, including yours. Our technicians train on DoorKing, LiftMaster, Elite, Mighty Mule, FAAC, BFT, Linear, Viking, and Ghost Controls, so we don’t walk up to your operator and tell you it’s a brand we’ve never opened. We stock common boards, remotes, and safety sensors for the brands most common in Aliso Viejo, and for less common parts we have local suppliers we’ve used for years, not a generic online order. Automated or manual, we know how it works.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Aliso Viejo Homes
- Undersized power runs from original builds. Homes built in the late 1980s through early 2000s often had conduit sized for a light fixture, not a gate operator. We see voltage drop that burns out motors prematurely, especially on builder-grade LiftMaster swing units in Westpark and Glenwood. The fix is an operator replacement plus upsized conduit, otherwise the next motor fails the same way.
- Rusted hinge posts on original wrought iron. Twenty to thirty years of irrigation overspray rots the base of the hinge post. The gate sags, the rack and pinion misaligns, and the operator grinds until something lets go. We repair or rebuild the post, rehang the gate, and then address the operator, because fixing only the operator wastes your money.
- Faded or damaged powder-coat that an HOA won’t approve. Aliso Viejo has a specific approved palette, and the review board knows when a repair panel doesn’t match. We carry standardized powder-coat swatches and can match the finish so the repair doesn’t get rejected on the next architectural walkthrough.
- No surge protection on the control board. Inland Orange County gets dry lightning and the occasional utility surge, and most 1990s gate installations never had a surge protector added. A $40 surge module installed now prevents a $400 board replacement later. We add them on every control board repair we do in Aliso Viejo.
Pricing for Electric Gate Repair in Aliso Viejo, CA
Here’s what electric gate repair actually costs in Aliso Viejo. Keypad replacement runs $145 – $285. Remote or receiver repair runs $95 – $185. Safety sensor alignment or replacement runs $160 – $320. Control board replacement runs $260 – $520 on residential systems. Gate motor or operator replacement runs $450 – $1,200 depending on the brand and whether we’re replacing a swing or slide unit. Commercial operator work starts around $420 and goes up with gate weight and cycle duty. What changes the price most is the age of your infrastructure. An operator swap on a home with properly sized conduit is straightforward. A repair on a Westpark home where the original builder ran 14-gauge wire to a 20-amp operator means pulling new conduit, and that’s real labor. Every quote is written and agreed before we touch a single bolt, so the number you approve is the number you pay. Call (877) 517-5469 for a free estimate.
We Also Serve Cities Near Aliso Viejo
Our service area covers Aliso Viejo and the surrounding South Orange County communities. We regularly handle electric gate repair in Laguna Woods, San Joaquin Hills, Laguna Hills, and Irvine, including commercial gate operators for HOA communities and apartment complexes across the area. If your property sits near the 73 toll road corridor, we’re already in your neighborhood most weeks.
Serving Aliso Viejo, CA — Our Local Coverage Area
We’re based in the Aliso Viejo area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Aliso Viejo
Yes. We carry standardized powder-coat swatches that match the approved palette for villages like Glenwood and Westpark. For repairs where the existing finish has faded, we color-match against the least sun-exposed section of your gate, so the new panel blends rather than standing out. In Westpark, we recently serviced a builder-grade LiftMaster swing gate operator that was struggling to open a wrought-iron driveway gate. The original installer had run undersized conduit, causing voltage drop that burned out the motor. We replaced the operator, upsized the conduit, and added a safety photocell, bringing the gate into UL 325 compliance and matching the HOA’s powder-coat finish. If your board requires an architectural review before any work starts, we’ll walk you through that process. Call (877) 517-5469 and we’ll bring the swatches to the estimate.
In Westpark specifically, we trace most repeat operator failures to undersized power runs from the original 1990s build. The conduit and wire gauge were sized for a light load, not a gate motor that draws heavy current at startup, so the operator runs hot, the motor burns out, and the board takes damage. We replace the operator and the power run together, and we add surge protection so the next failure isn’t just a year away. Expect $450 – $1,200 for a residential operator replacement plus any conduit work.
Yes, if the gate is structurally sound. We assess the hinge posts, the gate weight, and the available power at the location, then we quote the operator, the safety sensors, and the control system as one job. Adding automation to a manual wrought-iron gate in Aliso Viejo typically runs $1,800 – $4,200 depending on whether we need to pull new conduit and upgrade the hinges. The HOA approval is usually the longest lead item, so we’ll help you prepare that submission early.
Automatic gates in residential and commercial settings must meet UL 325 safety standards, which means photocell sensors or contact edges that stop and reverse the gate when something is in the path. Aliso Viejo’s HOA communities also commonly require secondary entrapment protection on shared gates. We install and verify every safety device on every repair and installation we do here, and we test the reversing function before we leave. Call (877) 517-5469 for an exact quote on bringing your gate up to current safety standards.
Usually, yes. Sagging on Aliso Viejo’s 20- to 30-year-old wrought-iron gates almost always traces to a rotted hinge post or worn hinge barrels, not the gate itself. We rebuild the post base, replace the hinges, and rehang the gate so it swings square again. Then we check the operator for damage from running against the sag and set the limits properly. A hinge post rebuild runs $350 – $800 depending on how much of the post needs replacing and whether we’re working in stucco or a block wall.
Written by Rob Vickers, Owner at San Diego Gate Company, serving Aliso Viejo since our first HOA gate project in South Orange County.