Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Mission Viejo, CA
Gate installation in Mission Viejo usually means either replacing a 40-year-old wood or wrought-iron gate that has finally given out, or adding an automated opener to a driveway entrance that was never built for one. We install both manual and electric gates across the 92690, 92691, and 92692 ZIP codes, and most jobs run between $2,200 and $6,500 depending on material and automation. The Mission Viejo difference comes down to the housing stock: tract homes built between 1965 and 1985 with original steel posts set in expansive clay soil, which shifts with every wet-dry cycle. That soil movement means a new gate here needs better post depth and hardware than a gate in a newer coastal development. Call (877) 517-5469 for a free measure and written quote.
Why Mission Viejo Homes Are Different
Mission Viejo is a master-planned community built largely between 1965 and 1985, and that construction window defines the gate work we do here. Thousands of homes in tracts like Madrid and Deane Homes still have their original driveway, side-yard, and pool gates hung on steel posts set directly into soil that expands in winter and contracts through the long dry summer. The gates themselves are typically mild-steel hinges and latches now 40 or more years old, rusted through in places and sagging at the corners. A homeowner calls us thinking they need a new gate, and often what they actually need is the existing gate re-hung, re-leveled, and fitted with new hardware so it operates the way it did in 1980.
The climate works against these older gates from two directions. Hot, dry summers pull moisture from wood gates until they crack and warp. Then the winter rain and irrigation runoff from surrounding landscape beds accelerates corrosion on steel components. In the 92691 ZIP especially, many original driveway gates were set with posts only 18 inches deep in expansive clay. After a rainy season, the clay swells and the posts tilt just enough that the gate drags on the driveway or the latch no longer lines up. This is a recurring call in the hillside neighborhoods where soil movement is more pronounced. Homeowners who want to preserve the original aesthetic of their tract home need a gate specialist who can repair in place, not a crew that defaults to a full replacement.
HOA and permit realities matter here too. Many Mission Viejo neighborhoods have architectural review committees that want exterior changes to match the original design language. If a gate replacement is needed, the material, color, and style typically need HOA approval before installation. We handle the gate side of that conversation regularly and can provide spec details when the association asks for them.
Styles & brands we work with
Our Main Mission Viejo Services
Two services account for most of the calls we take from Mission Viejo homeowners and property managers: gate repair for the older manual gates that dominate this housing stock, and electric gate repair for the automated systems that have been retrofitted over the years. Here is what each involves locally.
Gate Repair in Mission Viejo
Most gate repair calls in Mission Viejo come from exactly the scenario above: a 40-year-old gate on original hinges that has started dragging, sagging, or refusing to latch. The work is less about replacing the gate and more about diagnosing why the post shifted, the hinge rusted through, or the wood split at the stress point. In hillside neighborhoods where soil movement is more aggressive, we often find the post itself has tilted and needs to be re-set deeper with proper drainage before the gate can hang straight again. For the full scope of what we repair and what it costs locally, see our dedicated page on Gate Repair in Mission Viejo.
Electric Gate Repair in Mission Viejo
Automated gates in Mission Viejo range from original 1990s operators that have been running for 25 years to newer smart-enabled systems tied to phone apps. The common failure points here mirror the manual gate issues: soil movement affecting the gate leaf alignment, which then makes the motor work harder and trip its safety sensors. We also see a lot of weather-related control board failures and capacitor problems after heat waves. Our technicians are trained on nine major brands including LiftMaster, FAAC, and Viking, so we diagnose the existing system rather than recommending a brand switch. Details on symptoms, costs, and response times are on our Electric Gate Repair in Mission Viejo page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Mission Viejo
Gate installation in Mission Viejo is typically a replacement job on a home built between 1965 and 1985, where the original gate has finally exceeded what repair can reasonably restore. The specific challenge here is the soil: expansive clay that shifts seasonally means we set new posts deeper and with proper drainage than the original 18-inch installations common in tracts like the 92691 hillside lots. A new gate installed in Mission Viejo should be built to survive the next 40 years of wet-dry cycles, not just the next five. This is the full scope of our Gate Installation service, applied to this city’s specific housing conditions.
Every installation quote includes the gate itself, posts and hardware, labor, and any concrete or drainage work needed at the post bases. We quote a fixed price before any work starts, so there are no surprises at the end of the job.
Automatic Gate Installation
Signs you need it
You want to open your driveway gate without getting out of the car, or you need controlled access for a shared driveway, HOA entrance, or commercial property.
What it costs in Mission Viejo
Automatic gate installation typically runs $3,000 to $7,000 in Mission Viejo, including the operator, safety sensors, and control hardware.
How we do it
We measure the gate leaf weight and travel path, set reinforced posts if the existing ones are undersized for automation, mount the operator, install safety edges and photo sensors, then program travel limits and remotes.
Driveway Gate Installation
Signs you need it
Your existing driveway gate is rotted, rusted through, or so far out of square that repair would cost more than a clean replacement.
What it costs in Mission Viejo
A new manual driveway gate installed in Mission Viejo sits in the $1,800 to $4,500 range depending on material and width, with wrought iron and steel at the higher end.
How we do it
We remove the old gate and hardware, inspect the existing posts to determine if they can be reused or need to be re-set deeper, then hang the new gate on heavy-duty hinges and adjust the latch for a clean close.
Sliding Gate Installation
Signs you need it
Your driveway slopes or has limited swing space, and a rolling or cantilever sliding gate fits the property better than a swing gate ever will.
What it costs in Mission Viejo
Sliding gate installation in Mission Viejo typically runs $3,000 to $6,000, plus the operator if you want it automated.
How we do it
We pour or extend a concrete track pad, install the track or cantilever roller system, set the gate frame, mount wheels and guides, and adjust for smooth travel across the full opening.
Electric Gate Installation
Signs you need it
You have a new or existing gate you want automated, and the current setup has no operator, no wiring, or no safety sensors.
What it costs in Mission Viejo
Electric gate installation in Mission Viejo ranges from $2,800 to $6,500, including the operator, power run, sensors, and one or two remotes.
How we do it
We run conduit and electrical supply to the post, mount the arm or ram operator, install photo sensors and safety edges, then configure travel limits and code remotes or keypads.
What Gate Installation Costs in Mission Viejo
| Item | Typical range in Mission Viejo |
|---|---|
| Manual gate installation | $1,800 – $4,500 |
| Electric gate installation | $2,800 – $6,500 |
| Automatic gate installation | $3,000 – $7,000 |
Price in Mission Viejo moves with site work. If the original posts are set 18 inches deep in shifting clay, new post excavation and deeper concrete footings add to the job. Sloped driveways, HOA-required materials, and the need for a longer electrical run all push the quote toward the upper end. Whatever the number is, we agree on it before we start, and that is the price you pay.
Do you handle the electrical power run for an electric gate?
Yes. We run conduit and install the power supply from the nearest panel to the gate post as part of the installation. This includes the safety sensors and any control wiring the operator needs.
Can you match the original gate style for an HOA approval?
Usually yes. We work with wrought iron, steel, wood, and aluminum, and we can match the general proportions and finish of a classic Mission Viejo tract-era gate. We also provide the spec details HOAs ask for during architectural review.
Brands We Service in Mission Viejo
We work on virtually every major gate brand Mission Viejo homeowners and property managers are likely to own, including LiftMaster, Elite, FAAC, and Mighty Mule. Our trucks carry common parts for these systems, so many repairs are completed in a single visit. See our brands page for the full list and what we stock.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Mission Viejo, CA
| Service | Typical range in Mission Viejo |
|---|---|
| Gate repair (basic hardware) | $150 – $450 |
| Electric gate repair (diagnostic and component) | $225 – $650 |
| Gate operator replacement | $850 – $2,200 |
| Manual gate installation | $1,800 – $4,500 |
| Electric gate installation | $2,800 – $6,500 |
| Automatic gate installation | $3,000 – $7,000 |
| Post re-setting / concrete work | $400 – $1,200 |
| Control board replacement | $350 – $900 |
The two things that push Mission Viejo gate prices higher than the regional baseline are the age and condition of the original posts and the soil movement in hillside tracts. When a gate has dragged for two seasons, the fix often includes re-setting a post rather than just replacing hardware. Every quote is fixed and agreed before we start work, so there is no invoice larger than the estimate at the end.
Neighborhoods We Serve in Mission Viejo
We service the full city across all three ZIP codes, with regular calls from both the older central tracts and the hillside communities where gates shift with the clay. You will see our trucks across the lake-adjacent neighborhoods, the Deane Homes area, and the hillside streets where driveway gates are a working security feature, not decoration. Typical response time in Mission Viejo is same-day or next-day for urgent repair calls, with installations scheduled around your availability.
- Madrid
- Deane Homes
- Lake Mission Viejo area
- Hillside communities in 92691
- 92692 neighborhoods
Service Area – Cities Near Mission Viejo
San Diego Gate Company has served Mission Viejo since 2018, and we regularly work in the surrounding South Orange County communities where the housing stock and gate problems are similar. Our service area includes Coto De Caza, CA, Lake Forest, CA, Laguna Hills, CA, and Rancho Santa Margarita, CA. If your gate is acting up and you are anywhere in this corridor, call before it fails completely.
Serving Mission Viejo, CA — Our Local Coverage Area
We’re based in the Mission Viejo area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Mission Viejo
For urgent calls in Mission Viejo, we aim for same-day service when the problem is a gate that will not open or close at all. Non-urgent repairs are typically scheduled within one to two business days. Call (877) 517-5469 and tell us the symptom; we will tell you straight whether it can wait.
Most Mission Viejo HOAs require architectural review for a full gate replacement, especially in the older master-planned tracts. We provide the material, dimension, and color specs your HOA needs. For a repair that matches the existing gate, approval is rarely required.
Both. We repair and install gates for Mission Viejo HOA entrances, commercial properties, and residential driveways alike. The diagnostic approach is the same regardless of gate size: find the real failure point, fix it, and do not sell a replacement when the existing system is still sound.
If your Mission Viejo gate is sagging, stuck, or dead at the keypad, call (877) 517-5469 for a free estimate. We will tell you what is wrong, what it costs, and whether a repair or a replacement makes sense for your house and your budget. Gate specialists, not generalists.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Mission Viejo Customers Say
"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
— Roger Ackerman"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Rachel Vaughn"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
— Craig Ziegler