Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Perris, CA
Gate installation in Perris means building for wind, dust, and wide rural lots, not just swapping panels on a standard tract-home opening. We hang gates sized for long driveways off Ramona Expressway and through ZIPs 92570, 92571, and 92572, where the soil shifts between hot, dry summers and winter Santa Ana gusts. San Diego Gate Company has served Perris since 2018, and our crew handles everything from a single pedestrian gate to a full electric driveway system, free estimates included. Call us at (877) 517-5469.
Why Perris Homes Are Different
Perris sits at the base of the Gavilan Hills in a high-desert wind corridor, and the afternoon and seasonal gusts load every property-line gate: wood, chain-link, ornamental iron, and sliding RV gates. We see wind-fatigued posts, pulled hinges, and sagging frames far more often than simple hinge wear. Lots across ZIPs 92570 and 92571 run large and semi-rural, so many homes have long driveways with wide double gates plus owner-built side-yard access gates. Those owner-built gates often mix hardware types and hang on whatever posts were on hand, which means a repair call in Perris regularly becomes a re-hang of the post and gate together, not a hinge swap. Blowing dust and grit from the badlands around Lake Perris pack into rollers, tracks, and sliding-gate hardware, and the dry heat cracks wood pickets and posts faster than in more humid inland cities. A gate installed or repaired in Perris without accounting for that wind load will fail early, and our work here is built around that reality.
Styles & brands we work with
Our Main Perris Services
Two calls dominate our Perris schedule: repairing gates that the wind and soil have worked loose, and getting electric operators running again when dust and power issues knock them out. Each gets its own page and its own crew focus.
Gate Repair in Perris
Most Perris repair calls start with a gate dragging on the ground or a post leaning out of plumb. We re-hang sagging frames, replace wind-worked hinges with heavier hardware, straighten or reset posts, and rebuild latch setups on owner-built double gates that never aligned well in the first place. Perris dust also gets into roller tracks on sliding RV gates, and we clean and realign those rather than selling you a new track. Read the full breakdown at our Gate Repair in Perris page.
Electric Gate Repair in Perris
Electric gates in Perris live with two enemies: power surges from high-desert storms and fine dust that coats circuit boards and limit switches. We troubleshoot operators, safety loops, keypads, and remote receivers on LiftMaster, FAAC, BFT, and Linear systems, and we diagnose the actual fault before quoting any parts. If the operator can be repaired, that is the first recommendation. See specific repair details on the Electric Gate Repair in Perris page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Perris
A new gate in Perris has to be built for the wind corridor and the wide lots, not for a calm suburban lot. Whether you’re adding a driveway gate to a property in the 92571 ZIP or replacing an owner-built side gate with something square and true, we size posts, hinges, and gate leaves for sustained gust loading and dusty conditions. San Diego Gate Company has installed in Perris since 2018, and every job starts with a free on-site measure and a written price before any work begins. See the full scope on our Gate Installation page.
Automatic Gate Installation
Signs you need it
You’re getting out of the car in the wind and dust every time you come home, and the existing manual gate has sagged to the point it needs to be lifted to close.
What it costs in Perris
Automatic gate installation in Perris typically runs $3,800 to $9,500 depending on gate size, operator type, and access-control needs.
How we do it
We measure the opening, set posts in concrete at the correct depth for Perris soil, hang the gate, mount the operator, and run the safety loops, then test auto-reverse and photo-eye function before we leave.
Driveway Gate Installation
Signs you need it
Your driveway opening is wide enough for an RV or two cars, and the current chain-link double gate binds at the center and swings in the wind.
What it costs in Perris
Driveway gate installation in Perris usually falls between $2,725 and $6,400 for a typical residential double swing gate.
How we do it
We set reinforced posts for the gate load, weld or bolt a frame sized to the exact opening, hang the leaves with adjustable hinges, and set the latch and drop rod for both leaves.
What Gate Installation Costs in Perris
| Item | Typical range in Perris |
|---|---|
| Automatic gate installation | $3,800 – $9,500 |
| Driveway gate installation | $2,725 – $6,400 |
| Sliding gate installation | $3,200 – $7,800 |
Do you handle the power run for an automatic gate in Perris?
Yes. We trench and run the low-voltage control wiring and the line-voltage feed where a licensed electrician is needed, and we coordinate that work so you are not left chasing a second contractor.
What does a full driveway gate installation include in Perris?
It includes site measure, post setting, gate fabrication or assembly, hinge and latch hardware, and for automated gates the operator, safety edges or photo eyes, and control wiring. The price is agreed before work starts.
Brands We Service in Perris
We work on operators and access systems from FAAC, BFT, Linear, and Viking, plus the other major brands Perris homeowners and commercial sites already have on their fence lines. Our techs carry common controller boards, remote receivers, and limit switches for these brands, and most Perris service calls are completed the same day. Find more at our brands.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Perris, CA
| Service | Typical range in Perris |
|---|---|
| Gate repair service call | $75 – $130 |
| Gate repair hourly rate | $95 – $145 |
| Hinge replacement | $95 – $220 |
| Wood gate repair | $150 – $340 |
| Chain-link gate repair | $125 – $300 |
| Automatic gate opener motor replacement | $450 – $1,000 |
| Electric gate repair (common) | $200 – $500 |
| Circuit board replacement | $250 – $650 |
| Automatic gate installation | $3,800 – $9,500 |
| Driveway gate installation | $2,725 – $6,400 |
| Sliding gate installation | $3,200 – $7,800 |
Wind loading and owner-built posts push Perris prices toward the upper end when we have to re-hang the post as well as the gate, and dust-related motor and board failures add parts cost. Every quote is a written, upfront number, agreed before we start, with no surprise invoice at the end.
Neighborhoods We Serve in Perris
We run calls throughout the city and the unincorporated pockets around it, with most appointments scheduled within one to two business days and emergency repairs routed ahead when a gate will not secure.
- May Ranch
- North Perris
- Val Verde
- Lake Perris area
- Gavilan Hills
Service Area – Cities Near Perris
Our Perris crews also cover the surrounding communities, so if you’re a few minutes outside the city limits, the same gate team can reach you. We schedule regularly in Good Hope, CA, Mead Valley, CA, Romoland, CA, and Sun City, CA.
Serving Perris, CA — Our Local Coverage Area
We’re based in the Perris area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Perris
We prioritize calls where a gate will not close or secure, and we usually reach most Perris locations the same day for urgent repairs. Routine installs and non-urgent repairs are scheduled within one to two business days. Call (877) 517-5469 and we will give you a straight answer on timing.
Most residential gate work in Perris does not require a city permit, but HOA communities like May Ranch often need design approval before a new gate goes in. We can supply the specs and drawings your association or the city asks for as part of the install.
No. We provide free on-site estimates for gate installation and free phone estimates for most repairs, and the price you approve is the price on the invoice. The only cost before you approve work is the standard service-call fee when a technician comes out to diagnose a repair.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Perris Customers Say
"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
— Craig Ziegler"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
— Marco Morales"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Alejandro Mendoza