Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Fontana, CA | San Diego Gate Company
We repair Ghost Controls gate openers across Fontana, and the short answer is this: most failures here trace back to two things – heat and shifting posts. Fontana’s decomposed-granite soil and Santa Ana wind patterns push gates out of alignment, which makes even a well-built Ghost Controls opener work harder than it should. We’re an independent service provider, not a Ghost Controls dealer, which means we diagnose the actual fault instead of steering you toward a replacement you don’t need. Call (877) 517-5469 for same-day Ghost Controls service in Fontana.

Why Fontana Residents Choose Us for Ghost Controls Service
Most gate companies in Fontana can swap a board. Diagnosing why a Ghost Controls TDS2 keeps tripping its breaker in August – that’s a different skill set. Rob Vickers, our owner, has spent more than two decades tracing gate failures back to their real source. He’s known for catching the worn limit switch or bad ground that other shops miss when they blame the circuit board. That depth matters in Fontana, where Ghost Controls sales & service calls come from ranch homes in 92336 with forty-year-old iron gates and from master-planned streets in 92337 where vinyl gates warp in the summer heat. We stock OEM Ghost Controls parts for controllers and motors, and we’re genuinely brand-agnostic – if a repair makes sense, we’ll say so. If replacement is the honest call, we’ll walk you through that too.
Styles & brands we work with





Common Ghost Controls Gate Repair Problems We Solve in Fontana
- Control board and receiver failures from heat and power surges. Fontana summers routinely push past 100°F, and we see Ghost Controls boards cooked inside dark metal operator housings. A short in the receiver often shows up as an intermittent remote, not a dead board – worth testing before replacing anything.
- Arm and gate bracket wear from misaligned gates. When a post shifts in Fontana’s sandy soil, the gate binds slightly on every cycle. The Ghost Controls arm absorbs that strain, and eventually the bracket bends or the motor burns out. We realign the gate before fitting new parts, or the next failure is already scheduled.
- Battery and solar charging issues on older installations. Corroded wiring and shaded panels are common on Fontana properties with mature landscaping. A Ghost Controls solar kit that worked fine for years suddenly can’t hold charge once a ficus or oleander grows over the panel.
- Limit switch faults from warped vinyl gates. In 92337 and other south Fontana tracts, builder-grade vinyl gates soften and warp in direct summer sun. The Ghost Controls opener reads the limit switch correctly, but the gate geometry has changed – so it reverses or stops mid-travel.
- Entrapment protection trips in Santa Ana conditions. When wind gusts through the Cajon Pass, a loose gate post flexes enough to trigger the opener’s obstruction sensor. The opener isn’t broken; the post needs deeper concrete. We fix the cause, not the symptom.
Ghost Controls Service in Fontana: What Local Conditions Mean for Your Equipment
Here’s the thing about Fontana that generic repair guides miss: the soil here is decomposed granite, and it’s dry. Posts set in shallow concrete hold fine until a Santa Ana event pushes a double gate sideways, and then the whole assembly flexes. We see Ghost Controls openers blamed for failures that actually start with a post that was set 18 inches deep in sandy ground. Southridge, Hunter’s Ridge, and the older blocks near the former Kaiser mill site all sit on this same material. If your Ghost Controls gate has started binding, grinding, or reversing unexpectedly, the opener itself may still be fine – the geometry underneath it has moved. We check post depth, gate weight, and hinge wear before touching the electronics, because in Fontana that’s where the root cause usually lives.
Ghost Controls Models & Products We Service in Fontana
We service every Ghost Controls line you’re likely to own. That includes the Heavy-Duty Series – the TDS2 dual-gate and TSS1 single-gate openers you’ll find on wider Fontana driveway gates – and the Standard Series DTP1 and STP1 units common on smaller residential installs. We also work on Ghost Controls solar kits and accessories, including panel and battery diagnostics. For control boards, receivers, and motors, we use Ghost Controls sales & service parts sourced as OEM components, because compatibility issues with third-party electronics create callbacks. For mechanical parts – brackets, arms, hinges – we’ll use quality aftermarket components where they meet or exceed the original spec and save you money. We keep common Ghost Controls parts staged for fast turnaround across Fontana, from 92334 to 92337.
Ghost Controls Service Pricing in Fontana
Ghost Controls repair pricing in Fontana depends on what’s actually failed, and we quote the number before any work starts – not after. Here’s what we typically see:
- Control board replacement: $180 – $340, including diagnostics and the OEM part.
- Limit switch replacement: $120 – $220.
- Battery replacement: $80 – $150 for most Ghost Controls units.
- Gate realignment plus bracket repair: $150 – $350 depending on gate weight and post condition.
- Full diagnostic call (applied to repair if we do the work): $85.
Every estimate is free over the phone, and we confirm the final price before beginning any repair. Call (877) 517-5469 and we’ll walk through what your Ghost Controls system is doing – often we can narrow it down before we even roll a truck to your Fontana address.
See the difference
Before
After
Before
After
Before
AfterKey Takeaways
- We’re independent Ghost Controls specialists, not an authorized dealer – we repair what’s broken, not what’s convenient to replace.
- Fontana’s decomposed-granite soil and Santa Ana winds are the root cause of many “opener” failures we correct.
- OEM parts for electronics and motors; quality aftermarket for mechanical components.
- Same-day service is available for most Ghost Controls repairs across Fontana.
- Price is quoted and agreed before any work starts – no invoice surprises.
Serving Fontana, CA — Our Local Coverage Area
We’re based in the Fontana area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.

FAQs – Ghost Controls Gate Repair in Fontana
Heat, almost always. Fontana summers push operator housings well past 100°F, and a Ghost Controls motor working against a heat-softened vinyl gate or a slightly misaligned post draws more current than the circuit will allow. The breaker is doing its job. We test amperage draw with the gate disconnected to isolate the motor, then check the alignment that Fontana soil conditions are notorious for shifting. Call (877) 517-5469 for a proper heat-load diagnosis instead of repeatedly resetting the breaker.
Yes – that’s actually most of what we see in Fontana service area work. Homeowner-installed Ghost Controls units often have minor wiring quirks, under-tightened brackets, or no surge protection. We trace the full circuit path, correct the installation issues, and replace only what’s genuinely failed.
More often the receiver, and Fontana heat accelerates its failure. We carry a test remote on every truck, so we can isolate the fault in minutes: if our remote opens it reliably, your handheld is the problem. If it doesn’t, the receiver or antenna is the culprit. Either way, we quote it before repairing.
Santa Ana winds pushing through the Cajon Pass hit Fontana hard, and a gate that’s loose on its posts translates that wind load directly into the Ghost Controls arm. The obstruction sensors trip, the motor strains, and over time the brackets fatigue. We re-set posts deeper where needed and verify the gate swings clean before recalibrating the opener. Call (877) 517-5469 if your gate has started acting up after a windy night.
Two to three years in most Fontana installations. The heat shortens lead-acid battery life noticeably compared to coastal climates, and solar-charged systems degrade faster if the panel has picked up partial shade. We test battery capacity under load rather than just the surface voltage – a battery can show 12.8 volts and still be dead under start-up draw.
Service Areas Near Fontana
We run Ghost Controls service calls throughout the surrounding area, including Loma Linda, Los Serranos, Redlands, and the adjacent communities near the I-10 and I-15 corridors. If your gate is in Fontana’s 92335 or 92336, or across the line in Ghost Controls service in San Bernardino or Ghost Controls service in Rialto, we’ll have a tech nearby.
Book Your Ghost Controls Service in Fontana Today
If your Ghost Controls opener is acting up in Fontana, don’t wait for a Santa Ana wind to finish the job. Call (877) 517-5469 for a free estimate, and we’ll get a technician to your gate – same day in most Fontana ZIP codes.
Written by Rob Vickers, Owner at San Diego Gate Company, serving Fontana and Southern California.