Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Rubidoux, CA | San Diego Gate Company
We service Ghost Controls solar and battery swing and slide operators across Rubidoux, and most of the Ghost Controls calls we take here share one thing in common: the operator faults because the gate post has settled or tilted in sandy, river-adjacent soil, not because the motor failed. We’re an independent service company, not authorized by or affiliated with Ghost Controls, and our technicians are trained on their limit-switch behavior, solar charging quirks, and arm geometry firsthand. If your Ghost Controls gate is acting up in Rubidoux, call (877) 517-5469 for a free estimate.
Why Rubidoux Residents Choose Us for Ghost Controls Service
We work on Ghost Controls systems every week across the Inland Empire, so we don’t guess at their failure modes. Rob Vickers, our owner, has spent more than two decades diagnosing gate operators across Southern California, and he’s the first to tell you that a Ghost Controls fault in Rubidoux usually traces back to the ground under the post, not the board in the box. That’s the kind of diagnosis you get when gate repair is all you do. We’re Ghost Controls sales & service specialists in practice, not by certificate, and we bring OEM-compatible parts and a brand-agnostic eye to every job. Homeowners, HOA managers, and commercial property operators across Rubidoux call us because we diagnose the real problem, no upselling a new system when a repair will do.
Styles & brands we work with
Common Ghost Controls Gate Repair Problems We Solve in Rubidoux
- Operator trips on overload and reverses. This is the most common Ghost Controls issue we see in Rubidoux, and it’s almost always a post problem. When a gate post settles or tilts in sandy alluvium, the arm sweeps out of plane and the limit switches stop reading a clean full-open or full-closed position. The operator interprets that as resistance and reverses. Fix happens at the post, not the board.
- Solar panel and battery charging degraded. Rubidoux gets hot and dusty. After a Santa Ana event, fine dust coats solar panels, and summer heat cooks battery chemistry. The operator browns out mid-cycle and the gate stops partway, which looks like an electrical fault but is really a power-supply issue. We clean panels, test batteries, and replace what’s actually dead.
- Arm bracket and hinge hardware loosens. Wide, custom-built metal gates on long Rubidoux driveways get heavy use. The constant cycling loosens arm brackets and hinge hardware, causing binding and repeated force-limit faults that mimic a bad control board. We re-hang the gate, re-plumb the arm, and reset the travel limits.
- Dry heat warps gate frames. Rubidoux summers bake metal frames and dry out wood infill. A warped frame racks the gate, pulls the actuator out of alignment, and faults the operator even though the motor itself is sound. We re-frame or re-align the gate and remount the operator.
- Ghost Controls TDS2 and TSS1 solar kits lose track of travel. The TDS2 dual-gate and TSS1 single-gate solar swing kits rely on a clean, consistent swing path. When a post shifts even a degree or two, the control board loses its travel reference and the gate starts stopping short or swinging past the stop. We reset posts first, then reprogram travel.
Ghost Controls Service in Rubidoux: What Local Conditions Mean for Your Equipment
Rubidoux sits on the north side of the Santa Ana River, across from Riverside, where we also provide Ghost Controls service, and its soil is sandy alluvium, the kind of sediment a river drops over thousands of years. Former citrus groves and old irrigation channels shaped the property lines here, and many gates stand on large, uneven lots where that sandy soil never quite locks a post into place. What this means for a Ghost Controls owner in Rubidoux is straightforward: your operator is very often reading a post that has settled or tilted rather than a failed motor. The fix starts with digging out the post, re-setting it in concrete, re-plumbing the arm, and then re-reading the limit switches. If you skip the post work and just swap the control board, the gate will fault again within months. On a large lot off the river side of Rubidoux, a homeowner’s Ghost Controls TDS2 dual-gate kit kept faulting and reversing halfway through the swing. Our tech found the far post had settled and leaned in the sandy alluvium, so we pulled the post, re-set it in concrete, re-plumbed the arm, and replaced a fatigued solar battery. The gate has run clean since, without touching the control board. That’s the difference a soil-aware diagnosis makes.
Ghost Controls Models & Products We Service in Rubidoux
We service the full Ghost Controls residential line that shows up on Rubidoux driveways and in nearby Grand Terrace: the TDS2 dual-gate solar swing operator kit, the TSS1 single-gate solar swing operator kit, AXS1 and AXO1 accessory and operator add-on units, and the solar panel and battery kits used on custom-built driveway gates. We favor genuine Ghost Controls replacement parts, control boards, arms, limit switches, and solar and battery kits, because aftermarket boards on these operators frequently misreport battery state and fault early. When a motor is genuinely burned or a board is beyond economical repair, we say so and quote replacement. But more Rubidoux calls end in re-set posts, re-hung gates, and fresh batteries than in new operators.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Rubidoux
Ghost Controls repair pricing in Rubidoux depends on what the operator is actually doing and what the site looks like. A straightforward travel-limit reset or solar panel cleaning runs on the lower end. Re-setting a post in concrete, re-plumbing an arm, and installing a fresh solar battery runs higher because of the concrete work and the equipment time. Here’s a realistic breakdown of what we see:
- Diagnostic service call: $79 – $129, credited toward repair if you proceed
- Travel-limit reset and operator re-programming: $120 – $200
- Solar panel cleaning and battery test: $90 – $160
- Control board replacement (genuine Ghost Controls part): $280 – $450 installed
- Post re-set in concrete with arm re-plumb: $400 – $750 depending on post size and gate weight
- Solar battery replacement (single battery, conventional 12V sealed): $110 – $220 installed
Every quote is written out and agreed to before any work starts, so the invoice matches what you approved. Estimates are free. Call (877) 517-5469 for an exact number on your Ghost Controls system in Rubidoux.
Serving Rubidoux, CA — Our Local Coverage Area
We’re based in the Rubidoux area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Rubidoux
Usually not. In Rubidoux, a Ghost Controls operator that reverses partway through the swing is most often reading a post that has settled or tilted in the sandy river-adjacent soil, which throws the arm out of plane and confuses the limit switches. The motor is typically fine. We re-set the post, re-plumb the arm, and re-set travel limits before we ever quote a new operator. Call (877) 517-5469 to schedule a diagnostic.
Yes. We’re an independent gate company, not authorized by, affiliated with, or endorsed by Ghost Controls, and we don’t claim factory warranty authority on their behalf. What we do have is hands-on, brand-specific knowledge of their TDS2, TSS1, AXS1, and AXO1 lines, built from weekly service calls across the Inland Empire, including Glen Avon. Independent means we diagnose the real problem and quote a real fix, not a sales pitch.
Rubidoux summers hit hard, and heat degrades battery chemistry while dust from Santa Ana winds coats solar panels. A Ghost Controls operator that stalls mid-cycle on a hot afternoon is usually running on diminished battery capacity from heat-aged batteries or a dust-covered panel. We clean the panel, load-test the battery, and replace what’s actually tired. Call (877) 517-5469 and we’ll check it out.
Wide, heavy custom metal gates put constant stress on arm brackets, hinge hardware, and posts. In Rubidoux, where driveways are long and the gate swings are wide, the most common cause of repeated faults is loosened hardware or a post that’s settled in the sandy soil. That binding trips the force limit and mimics a bad board. We tighten and re-hang the gate, re-plumb the arm, and reset the operator.
Yes, and that’s exactly how we prefer to work. Gate realignment and operator repair go together on a Ghost Controls system, especially in Rubidoux where sandy alluvium keeps shifting posts. We don’t hand you off to a fence company or a welder. We pull the post, re-set it in concrete, re-hang the gate, re-plumb the arm, and re-program the operator. One call covers it. Call (877) 517-5469 for a free estimate.
Service Areas Near Rubidoux
We serve Rubidoux and the surrounding Inland Empire communities, including Loma Linda, Los Serranos, Redlands, Buena Park, Brea, and La Palma. If your Ghost Controls gate is in Rubidoux or a neighboring city, we’ll come out. We also run Ghost Controls service routes through Ghost Controls service in Placentia and Ghost Controls service in Highgrove. Our Rubidoux service area covers all of 92501.
Book Your Ghost Controls Service in Rubidoux Today
If your Ghost Controls gate is reversing, stalling, or faulting in Rubidoux, don’t wait for the post to shift further. Call (877) 517-5469 for a free estimate, and we’ll send a gate specialist to your driveway. Same-day service is available for urgent repairs, and every quote is agreed before work begins.
Written by Rob Vickers, Owner at San Diego Gate Company, serving Rubidoux and the Inland Empire with gate repair, electric gate repair, and gate installation.