Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Chino, CA
Gate installation in Chino usually runs $2,800 to $9,500 for a complete automatic driveway gate, including the operator, safety edges, and concrete work. Manual gates land closer to $1,200 to $4,500 depending on size, material, and whether we’re reusing existing posts or setting new ones. Chino’s mix of 1970s ranch properties, horse-zoned lots in the 91710 edges, and newer master-planned subdivisions in 91708 means most installations here involve either heavy steel pasture gates or builder-grade driveway gates that need upgrading. Our crews know the difference between a suburban vinyl gate and a 16-foot steel ranch gate that has to hold up to Santa Ana gusts and daily horse trailer traffic.
Call (877) 517-5469 for a free estimate on any gate project in Chino. We quote the full price before any work starts.
Why Chino Homes Are Different
Chino sits squarely in the Santa Ana winds corridor, and that single fact shapes more of our work here than anything else. Wind-fatigue hardware failure is the dominant repair call we see across 91710 and 91708: sagging double-drive gates, openers that stripped their gears fighting a wind-loaded gate, hinges that snapped at the weld, posts that leaned a few more degrees after every hot, dry blow. Coastal cities deal with slow corrosion. Chino deals with repeated mechanical trauma.
The heat compounds it. Summer temperatures regularly push past 100°F, which warps wood and vinyl, expands steel so gates drag on the latch side, and dries out welds until they crack. We find gates in Chino that were installed properly a decade ago and have simply worked themselves out of plumb through hundreds of thermal cycles.
The housing stock adds another layer. Chino’s older ranch properties, especially around the horse-zoned pockets and larger lots in 91710, often have wide driveway gates and pasture gates hung on posts that were never sized for the load. A 14-foot steel gate swinging on a 4×4 wood post set in loose fill will fail. The fix is rarely just a latch adjustment; it’s re-setting the post in deeper concrete, sometimes replacing it entirely with a steel post set below the frost line. Newer homes in the master-planned developments tend to have builder-installed sliding gates and swing gates with automated openers, but those were often spec’d to a price point, not to Chino’s wind and heat. We upgrade them routinely.
Chino also has HOA-governed communities where gate materials, colors, and even operator types must match community standards. We handle those constraints daily and know which designs pass review in the area.
Styles & brands we work with
Our Main Chino Services
Most Chino homeowners and property managers call us for one of two things: a gate that stopped working, or a gate that was never quite right to begin with. Both of those have dedicated Chino service pages.
Gate Repair in Chino
Gate repair in Chino is dominated by wind-damaged hardware, heat-warped panels, and sagging hinges on older ranch and tract-home gates. We re-set posts, re-hang heavy driveway gates, replace snapped hinge welds, and fix latch alignment problems caused by years of Santa Ana gusts cycling through the 91710 and 91708 areas. If your gate drags on the ground, won’t latch, or has pulled its post out of line, call us before the gate takes the post down entirely. Gate Repair in Chino covers the full scope of what we fix and what it costs in Chino specifically.
Electric Gate Repair in Chino
Electric gate repair in Chino often comes down to openers that burned out fighting wind resistance, safety edges that stopped reading, and control boards that failed after repeated power surges during hot-weather brownouts. We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems, so we can diagnose the opener you already have without pushing a replacement. Electric Gate Repair in Chino has the full breakdown of our electric gate service in this area.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Chino
Gate installation in Chino runs $2,800 to $9,500 for a complete automatic driveway gate system, and most of that range depends on whether we’re setting new steel posts in concrete or reusing existing footings. Wind loading drives the build spec: a gate installed in Chino without the right post depth, hinge gauge, and opener torque rating will fail within a few seasons. We size every install for the Santa Ana corridor, not for a mild-weather coastal environment. That’s the difference between a gate that works for six months and one that works for fifteen years. We also handle manual gate installation for horse properties and pasture access points, where the priority is structural durability rather than automation. For full details, visit our Gate Installation page.
Automatic Gate Installation
Signs you need it
You have a manual gate on a busy driveway, residents are getting out of cars to open it, or you’ve had people leave the gate open for convenience, which defeats its purpose.
What it costs in Chino
Complete automatic gate installation in Chino runs $3,800 to $9,500, including the operator, safety sensors, and post work.
How we do it
We set or re-set steel posts to a depth rated for the gate’s weight and wind exposure, mount the operator, wire the safety edges and photo beams, and program the travel limits and force settings so the gate stops safely on obstruction.
Driveway Gate Installation
Signs you need it
Your driveway has no gate, an old chain-link or wood gate that sags, or a gate too light for the traffic it handles.
What it costs in Chino
A new driveway gate, including posts and hanging hardware, typically runs $1,200 to $4,500 for manual operation and $3,800 to $9,500 with full automation.
How we do it
We measure the opening, spec the gate material and frame for wind load, set posts in concrete with proper depth and diameter, and hang the gate on adjustable hinges so it can be fine-tuned after settling.
Sliding Gate Installation
Signs you need it
Your driveway slopes, has limited swing clearance, or is too wide for a practical swing gate and needs a cantilever or track-style slide.
What it costs in Chino
Sliding gate installation in Chino ranges $3,500 to $8,500 depending on gate width, track or cantilever design, and operator type.
How we do it
We set the track or support posts, build the sliding frame to carry the gate’s weight without sagging, mount the guide rollers and operator, and tune the travel so the gate opens and closes smoothly without slamming.
What Gate Installation Costs in Chino
| Item | Typical range in Chino |
|---|---|
| Manual driveway gate, with posts and hardware | $1,200 – $4,500 |
| Automatic driveway gate, complete system | $2,800 – $9,500 |
| Sliding gate, automated | $3,500 – $8,500 |
How long does gate installation take in Chino?
Most residential gate installations in Chino take one to two days on site. Custom steel gates may need a week or two for fabrication before install day. We give you a written schedule before work begins.
Do we need a permit for a new gate in Chino?
Many Chino installations do not require a permit, but automated gates in some HOA communities and certain commercial properties do. We check the specific requirements for your property and HOA before submitting anything. Call (877) 517-5469 and we’ll verify it for your address.
Brands We Service in Chino
We’re certified on FAAC, BFT, Linear, and Viking systems, and our vans carry common boards, safety edges, and remote parts for those brands, so turnaround in Chino is usually same-visit or next-day. Not sure what brand your opener is? Call us and we’ll identify it. See our brands for the full list of what we work on.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Chino, CA
| Service | Typical range in Chino |
|---|---|
| Gate repair, minor hardware and alignment | $95 – $325 |
| Gate repair, structural (post re-set, weld repair) | $250 – $900 |
| Electric gate repair, circuit board replacement | $350 – $1,200 |
| Electric gate repair, full opener replacement | $1,300 – $3,800 |
| Manual gate installation | $1,200 – $4,500 |
| Automatic gate installation, complete | $2,800 – $9,500 |
| Sliding gate installation, automated | $3,500 – $8,500 |
| Electric gate repair, safety edge or sensor replacement | $180 – $650 |
What pushes the price up in Chino is usually wind: heavier gauge steel, deeper concrete footings, and higher-torque openers all cost more but they’re the difference between a gate that holds and one that fails after a few Santa Ana seasons. Every job gets a written quote before we start, so the number we agree on is the number you pay.
Neighborhoods We Serve in Chino
We work across all of Chino, including the newer subdivisions and the older ranch and horse-property streets. Our typical response for gate repairs in Chino is same-day or next-day for hardware and opener failures.
- College Park
- The Preserve
- Chino Hills-adjacent 91710 ranch tracts
- Kimball neighborhood
- East Chino horse properties
Service Area – Cities Near Chino
Our teams also cover the cities bordering Chino, so if your property sits near the city line, we’ll still get to you on the same schedule. We handle gates in Los Serranos, CA, Ontario, CA, Montclair, CA, and Eastvale, CA on the same call basis as Chino itself.
Serving Chino, CA — Our Local Coverage Area
We’re based in the Chino area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Chino
We run service calls in Chino daily, and most non-fabrication repairs are scheduled same-day or next-day. If your gate is stuck open or stuck closed, call us and we’ll tell you when a tech can be on site. Call (877) 517-5469 for current availability.
Yes, in many planned communities the HOA governs gate height, material, color, and sometimes operator noise. We work with Chino HOAs regularly and submit the design details they require so your installation doesn’t get flagged after the fact.
We do. Commercial properties in Chino call us for sliding vehicle gates, access control operators, and heavy-duty swing gates at apartment complexes, industrial yards, and storage facilities. Commercial work is quoted after a site visit. Call (877) 517-5469 to schedule one.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Chino Customers Say
"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Alejandro Mendoza"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
— Rosa Delgado"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Carrie Hoffman