Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Upland, CA
Gate installation in Upland usually starts at $1,800 for a basic single swing gate and operator, while a heavy custom wrought-iron driveway gate on a North Hills hillside lot runs $6,500 to $15,000 or more. The job here is rarely a simple bolt-on: Upland’s combination of 1950s-to-1970s ranch properties with wide driveway openings, plus newer hillside estates in 91784 exposed to Santa Ana wind loads, means most installs require real attention to post depth, frame rigidity, and operator torque. San Diego Gate Company has served Upland since 2018 and handles that full range, from a straightforward tubular steel pedestrian gate to a full access-control driveway system. Call (877) 517-5469 for a free on-site measure and written quote.
Why Upland Homes Are Different
Most Upland gate work happens on properties that simply don’t exist in the flatland cities west of here. The older core around 91786 is full of 1950s and 1960s California ranch homes on deep lots, many with wide double-driveway gates made of wrought iron or tubular steel that weigh several hundred pounds. Those gates have usually been hanging for decades, and the original posts were often set in soil that shifts with Upland’s hot, dry summers and periodic winter rain. In the North Hills neighborhoods of 91784, the picture changes again: gates sit on decomposed granite and sandy foothill soil, and when a Santa Ana wind event follows a dry season, lateral load on the gate face is enough to rack the frame, pull hinge bolts, and strain the operator motor. We check post plumb after every significant rain on those hillside jobs because we’ve learned that’s exactly when a previously solid gate starts dragging. Upland also has a higher-than-typical number of custom ranch properties with pedestrian gates on pool-safety fencing and side-yard access, so a single property often has two or three gates that need different hardware and different operator settings. The common thread is that the gate itself is rarely the only thing that failed; the post, the footing, and the soil around it are usually part of the story.
Styles & brands we work with
Our Main Upland Services
Upland homeowners and property managers call us for two services most often, and both have their own dedicated pages with deeper local detail.
Gate Repair in Upland
A sagging gate on a 1960s ranch home in Upland is usually not just a worn hinge. The combination of dry summer heat drying out wood frames, Santa Ana winds racking metal gates, and older posts losing plumb means the repair has to address the underlying cause or the gate will sag again in a year. We handle hinge replacement, post re-setting, frame straightening, wheel and track replacement on sliding gates, and full operator diagnostics. For the full local breakdown on cost and common failures, see Gate Repair in Upland.
Electric Gate Repair in Upland
Electric gate failures in Upland’s foothill neighborhoods frequently trace back to operator strain from wind-load cycles, not a bad board. When a LiftMaster or FAAC operator has been fighting a heavy gate through repeated Santa Ana events, the motor windings or gearbox wear faster than they would on a protected flatland lot. We diagnose the whole system: operator, control board, safety edges, photo eyes, remote receivers, and the gate’s mechanical condition. For local pricing and same-week scheduling detail, see Electric Gate Repair in Upland.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Upland
Gate installation in Upland typically ranges from $1,800 to $4,200 for a standard single swing or sliding gate with operator, while wide custom wrought-iron driveway gates on hillside lots in 91784 run $5,000 to $15,000 depending on size, weight, and access-control complexity. The job here is shaped by Upland’s housing stock: older ranch properties often need the existing post foundations replaced before a new gate can be hung, and North Hills installations require deeper footings and stronger hinge hardware to survive the wind channel that runs down from the San Gabriel Mountains. We measure, quote, and build for the actual soil and wind conditions on your specific street, not a generic template. The team at San Diego Gate Company handles all of it as a dedicated gate specialist, from the first measure to final operator programming. For the full overview of our Gate Installation process and hardware options, that page covers the details.
Automatic Gate Installation
Signs you need it
A manual driveway gate you’re opening by hand several times a day, a pedestrian gate that doesn’t latch reliably, or a property with a security gap that an automated access gate would close.
What it costs in Upland
Automatic gate installation in Upland runs $3,000 to $7,500 for most single-family properties, including operator, safety sensors, and one or two remotes.
How we do it
We measure the opening and check post plumb and footing condition, fabricate or order the gate to fit, set posts deeper than code minimum where the soil or wind exposure demands it, mount and wire the operator, install safety edges and photo eyes, then program remotes and keypads on site.
Driveway Gate Installation
Signs you need it
A driveway opening wider than 12 feet that needs a heavy gate, or an existing wood or chain-link gate that’s rotted, sagging, or simply inadequate for the property’s curb appeal and security.
What it costs in Upland
Driveway gate installation in Upland starts around $2,500 for a single tubular steel gate and runs $6,500 to $15,000 for a wide double wrought-iron gate with automation on a hillside lot.
How we do it
We verify the driveway width and slope, dig and pour reinforced post footings sized for the gate weight, hang the gate and align hinges, then install the operator and safety system with the travel limits set for the actual gate travel path.
Sliding Gate Installation
Signs you need it
A driveway that slopes up from the street or a property line with limited swing clearance where a cantilever or V-track sliding gate is the only workable option.
What it costs in Upland
Sliding gate installation in Upland runs $2,800 to $8,000 for a typical residential V-track or cantilever gate, with price driven by gate length, weight, and operator duty cycle.
How we do it
We set the track or cantilever posts on engineered concrete footings, hang the gate frame and verify it glides without binding the full travel length, then mount the operator and adjust the limit switches and safety loops for the exact opening width.
What Gate Installation Costs in Upland
| Item | Typical range in Upland |
|---|---|
| Standard single swing gate with operator | $1,800 – $4,200 |
| Wide custom wrought-iron driveway gate with automation | $5,000 – $15,000 |
| Sliding gate with operator and track | $2,800 – $8,000 |
How long does gate installation take in Upland?
Most Upland gate installations take one to two days on site after fabrication. Custom wide gates on hillside properties run longer because the concrete post footings need proper cure time before the gate can be hung. Call (877) 517-5469 for a realistic schedule on your specific opening.
Do you handle permits and HOA approval for gate installation in Upland?
We build to Upland’s current code and handle the installation work itself. HOA design review in Upland is often the longer lead time for front-facing gates, so we recommend starting that process early; we supply drawings and specs when the HOA requests them.
Brands We Service in Upland
We maintain certified working knowledge of LiftMaster, FAAC, Elite, and Mighty Mule, among others, which covers virtually every automated gate system installed across Upland. Our vans carry common boards, remotes, safety sensors, and hinge hardware for those brands, so many Upland repair calls are completed in a single visit. See our brands for the full list and what we stock.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Upland, CA
| Service | Typical range in Upland |
|---|---|
| Gate repair service call and diagnostic | $75 – $150 |
| Hinge replacement (pair, welded or bolted) | $250 – $600 |
| Post reset or replacement | $400 – $1,200 |
| Gate frame straightening and reinforcement | $200 – $800 |
| Sliding gate roller and track replacement | $300 – $900 |
| Electric gate operator replacement | $850 – $2,500 |
| Control board replacement | $350 – $900 |
| Safety sensor or photo eye replacement | $150 – $400 |
| Standard single swing gate with operator (installed) | $1,800 – $4,200 |
| Wide custom wrought-iron driveway gate with automation | $5,000 – $15,000 |
| Sliding gate with operator and track | $2,800 – $8,000 |
Two things push Upland gate pricing above the IE average: the weight of the wide iron gates common on this city’s ranch lots, and the wind exposure in the North Hills that demands heavier posts and stronger operators. Whatever the number, we quote it before any work starts and you approve the price up front.
Neighborhoods We Serve in Upland
We work across all three Upland ZIP codes, from the 1950s ranch streets of the older core to the newer hillside subdivisions above the 210 freeway. Our typical response time for Upland gate repair calls is 24 to 48 hours, and we schedule installation measures within the same week.
- North Hills (91784)
- San Antonio Heights foothill streets (91784)
- Historic downtown core (91786)
- The Colonies (91784)
- Northwest Upland ranch tracts (91785)
Service Area – Cities Near Upland
If your property sits just outside Upland, we cover the surrounding foothill and valley communities as part of our regular service area. That includes San Antonio Heights, CA at the base of the mountains, Claremont, CA to the west, Montclair, CA down the hill, and Rancho Cucamonga, CA to the east. The same team and the same upfront pricing apply wherever the gate is.
Serving Upland, CA — Our Local Coverage Area
We’re based in the Upland area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Upland
Most Upland gate repair calls are scheduled within 24 to 48 hours. If a gate is stuck open or won’t close and it’s a security issue, call (877) 517-5469 and we’ll tell you our earliest available slot for your specific neighborhood, including the North Hills and downtown areas.
Some Upland HOAs, especially in newer foothill developments, have design guidelines for gate style, height, and color. We provide drawings and hardware specs when your HOA needs them, and we build to code regardless; the HOA approval timeline is usually the part we can’t control.
No. We come out, measure, diagnose, and give you a written quote before any work starts. The price we quote is the price you approve, and we don’t start until you’ve signed off on it. Call (877) 517-5469 to book a free estimate.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Upland Customers Say
"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
— Shanice Prince"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Ryan Norris"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
— Roger Ackerman