Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Fontana, CA
Gate installation in Fontana runs $1,400 to $8,500 for most residential jobs, and $4,000 to $25,000 or more for commercial slide gates along the I-10 and I-15 corridors. What makes Fontana different is the split housing stock: aging wrought-iron gates on the north side near the former Kaiser Steel mill site, and builder-grade vinyl gates from the 1990s and 2000s in the newer master-planned tracts south of the 210. The Santa Ana winds that funnel through the Cajon Pass expose short posts and weak footings every season. Call (877) 517-5469 for a free estimate from a gate-only specialist.
Why Fontana Homes Are Different
Fontana’s gate work splits along two distinct eras. North of Foothill Boulevard, in the 92335 and 92336 ZIP codes, you’ll find post-WWII stucco tract homes and ranch-style houses with chain-link and wrought-iron front gates anchored in concrete that’s now 40 to 70 years old. Those gates sag, the hinges corrode, and the posts lean because the concrete footings were poured shallow in Fontana’s decomposed-granite soil. South of the 210, in 92337 and parts of 92336, the Southridge and Hunter’s Ridge tracts are filled with Mediterranean-style stucco homes governed by HOAs. Those properties run builder-grade vinyl gates and ornamental steel gates from the 1990s and 2000s. The operators fail first; the hinges go next.
Climate matters here more than most homeowners realize. Summer heat in the Inland Empire bakes gate operators, warping vinyl panels and cracking powder-coated finishes. Santa Ana winds scream through the Cajon Pass corridor every fall, and we routinely find gate posts that were set short, sometimes just 18 inches deep in sandy soil that never froze, so the original installer never bothered with proper depth. Those posts tilt or blow over entirely. Then winter rains arrive and expose rust on older iron gates and loosen footings that were already marginal. A Fontana gate has to handle heat, wind, and a soil type that punishes shortcuts.
Styles & brands we work with
Our Main Fontana Services
Most Fontana calls to us start with one of two problems: a gate that won’t swing or slide because something mechanical failed, or an electric operator that stopped responding. Both are covered below, and both have their own dedicated Fontana pages.
Gate Repair in Fontana
Fontana gate repair calls lean heavily toward older wrought-iron and chain-link gates on the north side, where rusted hinges and sagging frames are the daily reality. We also see plenty of vinyl gate failures in the south tracts, usually cracked panels or posts that shifted in wind events. Our technicians diagnose the actual cause, whether it’s a failing hinge weld, a post that’s lost its footing, or a frame that’s out of square, and quote the fix before any work starts. Gate Repair in Fontana covers the full breakdown of what we do.
Electric Gate Repair in Fontana
Electric gate repair in Fontana means dealing with operators that have been cooked by Inland Empire summers or damaged by Santa Ana wind gusts that force the gate against its stops. We work on LiftMaster, FAAC, Elite, Mighty Mule, and most other brands you’re likely to own, diagnosing boards, limit switches, receivers, and safety edges without pushing a replacement when a repair will do. Electric Gate Repair in Fontana has the full picture on operator troubleshooting and costs.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Fontana
Gate installation in Fontana means building for wind, heat, and soil that punishes short posts. Whether you’re adding a driveway gate to a 1950s ranch home in 92336 or replacing a builder-grade vinyl gate in a Southridge HOA community, the job has to be anchored deeper and built stronger than the original. Gate Installation is what we do every day, from manual swing gates to full electric slide systems.
Automatic Gate Installation
Signs you need it
You’re getting out of the car to open and close the gate manually, or your existing operator has failed and replacement parts are no longer worth chasing.
What it costs in Fontana
Automatic gate installation in Fontana typically runs $3,200 to $12,000, depending on gate size, operator type, and whether we’re running new power or reusing existing conduit.
How we do it
We set the posts below the wind-stable depth we know Fontana’s decomposed-granite soil requires, mount the gate and operator, run or verify the power feed, and program remotes, keypads, and safety edges before testing the full cycle repeatedly.
Driveway Gate Installation
Signs you need it
Your current gate is sagging past the point of repair, or you have no gate and want security and curb appeal without fencing the entire property.
What it costs in Fontana
Driveway gate installation in Fontana starts around $1,400 for a basic manual single-swing gate and runs to $8,500 for a larger automated double-swing or slide setup.
How we do it
We measure the opening, fabricate or order the gate and frame to fit, set the posts at the proper depth for Fontana’s sandy soil, hang the gate, and install any operator, keypad, or sensor package you’ve chosen.
Sliding Gate Installation
Signs you need it
Your driveway slopes or your setback is tight, where a sliding gate saves the swing space that a traditional hinged gate would need.
What it costs in Fontana
Sliding gate installation in Fontana typically falls between $3,500 and $12,000 for residential work, with commercial cantilever slide gates on the I-10/I-15 warehouse corridors running higher based on length and motor size.
How we do it
We set the track or cantilever rollers on a concrete footing built for Fontana’s soil, hang the gate, mount the operator and rack, and dial in the limits and safety loops so the gate opens and closes cleanly every time.
What Gate Installation Costs in Fontana
| Item | Typical range in Fontana |
|---|---|
| Manual single-swing driveway gate | $1,400 – $3,500 |
| Automatic gate operator included | $3,200 – $8,500 |
| Sliding gate (residential) | $3,500 – $12,000 |
Do I need an HOA approval before installing a gate in Fontana?
Yes, in most of south Fontana’s master-planned communities, especially 92337, your HOA likely requires design review before any gate changes. We can help you understand what to submit and build to the spec they approve.
Can you install a gate on Fontana’s sandy soil without it leaning later?
Yes. We excavate deeper than the original builders typically did, use proper concrete footings sized for the gate’s weight and wind load, and add steel reinforcement where the Santa Ana exposure demands it. Call (877) 517-5469 for an exact quote, estimates are free.
Brands We Service in Fontana
We’re trained on LiftMaster, FAAC, Elite, and Mighty Mule, along with five other major gate and access-control brands. That covers nearly every system installed in Fontana, from builder-grade residential operators to commercial slide gate motors on warehouse lots. See our brands for the full list, and know that we keep common boards, remotes, and safety edges stocked for faster Fontana turnarounds.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Fontana, CA
| Service | Typical range in Fontana |
|---|---|
| Manual single-swing driveway gate installation | $1,400 – $3,500 |
| Automatic gate installation | $3,200 – $12,000 |
| Sliding gate installation (residential) | $3,500 – $12,000 |
| Gate repair (hinges, welding, sagging frames) | $150 – $450 |
| Electric gate repair (operators, boards, sensors) | $180 – $600 |
| Commercial slide gate repair (I-10/I-15 corridors) | $300 – $1,200+ |
Fontana’s wind exposure and decomposed-granite soil push prices up when posts need to be re-set deeper or when rust and corrosion require more cutting and welding than a typical repair. Every job is quoted and agreed in writing before work starts, so the number we give you is the number you pay.
Neighborhoods We Serve in Fontana
We run service calls across all four Fontana ZIP codes, from the older blocks near the former Kaiser Steel mill site to the HOA-governed tracts in Southridge and Hunter’s Ridge. Response times vary by location, but most Fontana calls are reached same-day or next-day.
- Southridge
- Hunter’s Ridge
- Downtown Fontana (92335)
- Summit Heights area (92336)
- West End near the 10/15 interchange
Service Area – Cities Near Fontana
San Diego Gate Company serves Fontana and the surrounding Inland Empire communities. We regularly work in Bloomington, CA, Rialto, CA, Glen Avon, CA, and Pedley, CA. If you’re on the edge of Fontana or just across a city line, call us and we’ll confirm coverage for your address.
Serving Fontana, CA — Our Local Coverage Area
We’re based in the Fontana area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Fontana
Most Fontana calls are reached same-day or next-day. Emergency gate-down situations, especially at commercial properties along the I-10 and I-15 corridors, get priority. Call (877) 517-5469 and we’ll give you a straight answer on when a tech can be there.
Most residential gate replacements don’t require a city permit, but if you’re in an HOA, especially in south Fontana, your association likely has design approval requirements. We’ll help you identify what your HOA needs before we start.
We cover all four Fontana ZIP codes: 92334, 92335, 92336, and 92337. That includes the older north-side neighborhoods near the former steel mill, the newer Southridge and Hunter’s Ridge tracts, and the warehouse districts along the freeway corridors.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Fontana Customers Say
"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Carrie Hoffman"Fixed the immediate problem. He was honest that the operator is near end of life and I should budget for a replacement, which I appreciate even if it wasn't what I wanted to hear."
— Arjun Rao"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
— Shanice Prince